Supporting implant equipment in fabs and cleanroom environments requires a unique combination of technical expertise, problem-solving skills and an in-depth understanding of safety and contamination protocols.
At IES, we’ve been providing expert engineering support for global original equipment manufacturers (OEMs) and semiconductor manufacturers since 1991.
Over the years, we’ve seen firsthand the key challenges that field service engineers (FSEs) face in these environments - and the best ways to tackle them.
Here are six major challenges FSEs encounter when supporting implant equipment - and our tried-and-tested strategies for managing them.
1. Contamination Control
Semiconductor fabs operate in meticulously controlled cleanroom environments. That’s because even the smallest particles of contamination can damage wafers and cause costly production delays.
FSEs need to be extremely careful not to introduce any contamination (from dust to skin flakes) during tool maintenance. Otherwise, the consequences could be significant.
We recommend:
- Complying with ISO Class 1-10 cleanroom standards: Every single material brought into the cleanroom must meet contamination-free standards. FSEs should also always follow proper gowning and decontamination procedures at all times (including wearing full-body cleanroom suits, gloves and face masks).
- Using specialised cleaning and testing tools: Specialised equipment, like particle counters, should be used to measure airborne contamination levels, alongside HEPA-filtered vacuums to remove fine particulates.
- Pre-cleaning and packaging equipment: All spare parts and tools should be wiped down with cleanroom-approved solvents (like isopropyl alcohol), and sealed in double-layered, contamination-free packaging before entering the cleanroom.
- Following cleanroom protocols: When inside the cleanroom, movement should be kept to a minimum to avoid unnecessary airflow disturbances, which can contribute to particle spread.
2. Working around live production schedules
Semiconductor fabs typically run around the clock, meaning there’s often very little room for downtime.
This can make it difficult for FSEs to schedule maintenance without interrupting production. That means they must find ways to work around production schedules while ensuring the reliability of implant equipment.
We recommend:
- Coordinating with fab operators: Maintaining close communication with production teams allows FSEs to schedule maintenance during natural production lulls or shift changes.
- Implementing predictive maintenance: AI-driven diagnostics and sensor data can help anticipate failures, allowing FSEs to undertake any required proactive maintenance before major breakdowns occur.
- Conducting on-the-fly troubleshooting: FSEs must be ready to diagnose and resolve issues quickly and on-demand to minimise potential disruptions.
- Utilising remote monitoring tools: Continuous equipment monitoring reduces the need for on-site interventions and ensures FSEs can perform maintenance at the least disruptive times.
- Having redundant backup systems in place: Ensuring spare parts and backup components are readily available can reduce downtime in the event of a sudden and unexpected failure.
Discover 5 ways FSEs support fabs to keep tools running.
3. Diagnosing complex failures
Because ion implantation systems contain such highly complex and intricate components (such as RF power supplies, vacuum systems, electrostatic beam steering mechanisms and precision cooling systems) and failures can arise from such a wide variety of sources, diagnosing failures can be time-consuming and challenging.
FSEs will need to have deep expertise in multiple engineering disciplines - including mechanical, electrical and software engineering - as well as knowledge of and experience using advanced troubleshooting methods and tools.
We recommend:
- Using advanced diagnostic tools: Access to and experience using tools such as oscilloscopes, helium leak detectors and infrared thermography cameras are crucial for spotting specific failure points.
- Cross-training on multiple systems: Expanding FSE expertise across different implant systems can enhance their troubleshooting capabilities and reduce the time it takes to diagnose issues.
- Checking logs and analytics: Most modern implant systems provide detailed error logs and performance analytics. FSEs should leverage this data to identify trends and potential root causes of failures.
- Remote monitoring solutions: IoT-enabled diagnostics and remote monitoring tools can provide real-time insights into equipment performance, which can enable FSEs to detect issues before they escalate.
- Collaborating with OEMs: OEM support teams can provide additional insights and technical guidance for resolving complex failures effectively.
4. Tight space and ergonomic challenges
Implant equipment is often densely packed inside fabs to maximise production efficiency. Because of that, FSEs can find themselves working in significantly tight and confined spaces.
This can make manoeuvring difficult and require engineers to bend, stretch and reach into awkward positions for extended periods, increasing the risk of fatigue and repetitive strain injuries. As well as increasing the risk of accidents and injuries from handling heavy tools and components in cramped spaces.
We recommend:
- Using compact and specialised tools: To improve comfort when working for long hours, engineers should use ergonomically designed tools that stop them from having to strain.
- Implementing ergonomic best practices: Regular stretching exercises and using proper lifting techniques will help reduce strain and the risk of long-term injuries.
- Rotating activities: Where possible, FSEs should frequently rotate between different maintenance tasks to minimise prolonged stress on specific muscle groups.
- Enhancing workstations: Whenever feasible, adding adjustable work surfaces and ergonomic seating in maintenance areas can improve comfort and reduce strain.
5. Rapidly evolving technology
Semiconductor technology is constantly evolving.
FSEs must balance continuously updating their knowledge and skills to keep up with new implant tools with being able to maintain legacy equipment that’s still in operation.
This makes training and adaptability more critical than ever.
We recommend:
- Undertaking continuous training: Regular training is crucial for ensuring FSEs remain proficient in the latest systems and troubleshooting techniques.
- Gaining hands-on experience: Engineers need plenty of opportunities to work on new models to improve familiarity and reduce learning curves in live environments.
- Engineers should have opportunities to work on new models before deployment to improve familiarity and reduce learning curves in live environments.
- Developing standardised strategies for upgrades: Creating clear transition plans for upgrading legacy systems while ensuring minimal disruption to production can streamline adaptation to new technology.
- Collaborating with R&D Teams: Working closely with research and development teams helps FSEs stay informed about upcoming technological changes and necessary skill adjustments.
6. Communication and documentation
Maintaining implant equipment in fabs requires effective communication between all parties involved and precise documentation.
But, for this to happen, FSEs must be able to coordinate with multiple teams and stakeholders (including fab operators, process engineers and safety personnel) to ensure that maintenance and repairs are conducted smoothly and efficiently.
We recommend:
- Adopting standardised reporting tools: Digital logbooks and maintenance tracking systems help ensure all work has been accurately recorded and is easily accessible for future reference.
- Regular status updates: Frequent briefings help keep all stakeholders informed and aligned on maintenance schedules and equipment status.
- Standardised checklists for procedures: Having clear, detailed checklists in place ensures no critical step is missed during servicing or troubleshooting.
- Using remote communication tools: Real-time collaboration tools and remote support software help FSEs quickly resolve issues with guidance from experts, if and when needed.
Enhance your team with expert on-site engineering support
We’ve been providing highly skilled engineering resources for OEMs and end users supporting implant equipment since 1991.
Head to our field service engineers webpage to find out more about how we can support your project.